Epilog Helix Laser Cutter
The Helix is a 50-watt laser cutting/engraving machine. It can cut and engrave many materials both organic and non: we have managed to cut and engrave wood, glass, acrylic, and paper products like cardboard or cardstock. The only restrictions we have are no chlorinated/brominated materials due to potential machine damage. Lexan-brand plexiglass is also not recommended as it absorbs the laser radiation and tends to melt and scorch rather than cutting cleanly.
Available at: Fablab
| Technical Specifications | Details |
|---|---|
| Engraving area | 24 in. x 18 in. |
| Maximum material thickness | 8.5 in. |
| Laser source | 50 watt CO2 tube |
| Resolution | Min: 75 DPI Max: 1200 DPI |
| Material Name | Size | Cost |
|---|---|---|
| Acrylic sheet, cast clear | Max Size: 24 in. x 18 in. | Supplied by user |
| Acrylic sheet, cast colored | Max Size: 24 in. x 18 in. | Supplied by user |
| Acrylic sheet, extruded clear | Max Size: 24 in. x 18 in. | Supplied by user |
| Leather sample | Max Size: 24 in. x 18 in. | Supplied by user |
| Wood (Thin Sheet) | Max Size: 24 in. x 18 in. | Supplied by user |
| Chipboard | 14 ply | $0.005/sq. in. |
| Chipboard | 30 ply | $0.005/sq. in. |
| Cardboard | Single Layer | $0.005/sq. in. |
| Plywood, UV Coated Birch | 5.2mm | $0.01/sq. in. |
| Plywood, Russian Birch | 6mm | $0.01/sq. in. |
Privileges and Loan Periods
This equipment is available at the following locations: Fablab
