Roland SG3-540
The Roland SG3-540 is able to print graphics on, and cut shapes out of, a wide variety of materials. It is a professional-grade printer, with inks rated for 3 years outdoor/direct-sun exposure(contingent on each individual material's lifetime rating).
The maximum printable area on this machine is 52" wide, contingent on the width of the material loaded into it.
The VersaWorks software used to print on it requires image files formatted in the CMYK color scheme, and has an extremely wide variety of options available to customize and optimize prints.
To download the training and usage manual for this machine, use the link under the "Related Documents" section to the right.
Available at: Fablab
| Technical Specifications | Details |
|---|---|
| EPS | Best file format to use with this printer, will allow for custom cut lines |
| Second-best file format to use with this printer, will allow for custom cut lines | |
| JPG | Third-best file format, will not allow for custom cut lines |
| Material Name | Size | Cost |
|---|---|---|
| Matte White Adhesive Vinyl | 24" x 1" | $0.25 / Linear Inch |
| 7 mil Clear Static Cling Vinyl | 54" x 1" | $0.25 / Linear Inch |
| Siser Hi-5 Matte Printable Heat Transfer Vinyl + Masking | 20" x 1" | $0.50 / Linear Inch |
| Siser HeatSoft Transfer Masking-Only | 20" x 1" | $0.20 / Linear Inch |
| Illumisol Glossy Backlit PET Film | 54" x 1" | 0.42 |
| SoftSign Woven Polyester Banner | 54" x 1" | $0.40 / Linear Inch |
| Glossy Vinyl Banner | 39" x 1" | $0.20 / Linear Inch |
| Printer Ink | 1 mL | 0.50 |
Privileges and Loan Periods
This equipment is available at the following locations: Fablab
